The upgrade process for Windows 7 is pretty straightforward – if you’re doing an in-place upgrade from 32 bit Vista to 32 bit Windows 7 or 64 bit Vista to 64 bit Windows 7. It gets tricky when you want to perform an upgrade from 32 bit Vista to 64 bit Windows 7.
You can’t do an in-place upgrade. An in-place upgrade is where Windows 7 is installed while Vista is running. Your programs, documents and settings are preserved.
To migrate from one architecture to another, as in the case of 32 bit to 64 bit, you must perform a clean or custom install. Unfortunately, the upgrade version of Windows 7 must be able to check to see that you are eligible for the upgrade.
We spent a ton of time tonight searching through the Windows documentation. We had just purchased a new hard drive and a Windows 7 64 bit upgrade to install on that hard drive, using the eligibility of an existing 32 bit Vista installation. We tried several times to perform a custom installation, but every time we were asked to enter the product key, Windows reported that the key was invalid.
The secret to getting this type of upgrade to work lies in a free tool provided by Microsoft called Windows Easy Transfer. It’s promoted as the tool to upgrade from Windows XP to Windows 7. It is recommended for a custom install to upgrade from Windows Vista to Windows 7, but we didn’t see anywhere that it was required. We had no interest in moving any files or settings to the new installation, so it wasn’t an obvious tactic.
Using Windows Easy Transfer apparently saves the information from the Vista installation so that Windows 7 recognizes that the upgrade is valid.
Here’s the correct process to perform a clean, custom installation using a Windows 7 upgrade.
If you find a place where Microsoft states that Windows Easy Transfer is required to upgrade from Vista 32 bit to Windows 7 64 bit, please let us know in the comments. If you know of another way to perform this type of upgrade without using Windows Easy Transfer, that’d be good to know as well.
Learn about an easy yet little-known feature of a popular ad blocker that lets you…
With attacks on our privacy coming from every direction, it's tough to know where to…
I'm fairly convinced the internet has become a cesspool of advertising and coercive content meant…
Learn about the iSeries educational collection from NAA, watch the last episode and register for…
In my review of the Samsung Galaxy Note8 on Verizon, I found a beautiful device…
You should always use a VPN whenever you're connected to a wireless network that's not…
View Comments
Bullshit it is. I poured three hours into my in-place 32-bit upgrade on my Lenovo X60 Tablet and didn't get past the compatibility screen.$200 and this patch doesn't even work.
Compatibility is tricky, Mr Spectre. did you try moving the paperclip up 2mm?
http://www.microsoft.com/windows/windows-7/get/...
Towards middle bottom of page: "How do I do a custom (clean) installation?" There the Windows Easy Transfer is discussed.
Aaron, thanks for the info and tips. I'm sure it will save me a large amount of time!
I read that many times.
"Windows Easy Transfer is a free tool you can use to copy your information (but not programs) off your PC and then put them back after you install Windows 7."
...and...
"If you used Windows Easy Transfer..."
Words like "can use" and "if you used" led me to believe that it wasn't a requirement of a clean install since those passages were in the clean install section of the document. They should have said "must use" since that more accurately describes how to perform a custom install using an upgrade license.
I read that many times.
"Windows Easy Transfer is a free tool you can use to copy your information (but not programs) off your PC and then put them back after you install Windows 7."
...and...
"If you used Windows Easy Transfer..."
Words like "can use" and "if you used" led me to believe that it wasn't a requirement of a clean install since those passages were in the clean install section of the document. They should have said "must use" since that more accurately describes how to perform a custom install using an upgrade license.
indeed, the comments in this post, coupled with the Microsoft info, definitely parlay to "must use"... chalk it up to cost of early adoption?
while you're still in "microsoft fanboy" (your statement, i believe) mode, what do you think of win7? worth the upgrade?
I believe to do a custom install after you "wipe" the hd clean,boot to the 7 upgrade disk, you will be prompted to insert the vista install disk and then after 7 deems the vista cd to be valid, you will be prompted to insert the 7 disk. This is for a "not in place" upgrade. Go to the microsoft site for instructions. Do run easy transfer to save doc's. When you do a custom install, of course because you wiped the hd clean your programs and drivers, such as printer will need to be reinstalled.
I believe to do a custom install after you "wipe" the hd clean,boot to the 7 upgrade disk, you will be prompted to insert the vista install disk and then after 7 deems the vista cd to be valid, you will be prompted to insert the 7 disk. This is for a "not in place" upgrade. Go to the microsoft site for instructions. Do run easy transfer to save doc's. When you do a custom install, of course because you wiped the hd clean your programs and drivers, such as printer will need to be reinstalled.
Seems impossible at first, but when reading it now it look really possible. It worked on my laptop.